Friday 18 September 2015

WestFest 2015 - Part 3

An annual exhibition organised by the South West local group. 

Part 3


Heybridge Wharf


A 50 Something challenge 3mm scale 14.2mm gauge layout by Mike Corp of the Bristol/Avon group.

 

Heybridge Wharf is purely fictitious and is situated somewhere in Suffolk as one of the last inland wharfs still operating. The railway was built under the Light Railways Act as the Hey Light Railway to connect the town of Heybridge to the Great Eastern Main Line via Heybridge Wharf.


The trains from the main line enter Heybridge Wharf via the line between the Church and the gas works. This is the end of the line for the stock not allowed to proceed along the tramway to Heybridge Town. 

Those that are allowed will run round their train and proceed along the tramway squeezed between the gas works and Colly Tobbold's brewery. The wharf receives one of the last barges still trading, but now converted with a diesel engine.

The layout is built of plywood with 3mm Society 14.2mm gauge track and the pointwork from 3SMR. Points are operated by Hoffmann stall point motors and couplings are adapted B&B. 




Rolling stock is from Finney & Smith (who are now no longer trading), Worsley Works and the 3mm Society. Whilst some of the buildings are scratch built, most are super-detailed Bilteezi card kits.

Dunkton Combe

A Great Western 3mm scale 12mm gauge layout presented by Richard Pope of the North Wilts Group.
 
History: The line ran from Limpley Stoke, on the Bath - Westbury line, to Hallatrow on the Bristol - Frome line.




In real life, the line closed to passengers in 1925. The section from Hallatrow to Camerton closed completely in 1932 after all the local rail-served collieries were worked out. A service of one coal train a day, also carrying small amounts of other local goods, continued from Limpley Stoke until the Camerton Colliery closed in 1950. The remaining goods service to the school and mill at Monkton Combe ended in 1951.



In our imaginary world, the last 6 miles between the junction at Limpley Stoke and Dunkerton have remained open into the mid-1950s, with a basic service of 5 passenger and one goods train per day on weekdays and Saturdays. There is normally no service on Sunday but you may see a ballast train arrive, run round and depart again to work further back along the line. Passengers are mainly workers at the nearby mill (owned by T R Freeman & Sons and producing flock for filling matresses) and day boys at the public school. The mill and school also account for most of the goods traffic.


Bob Brown, who built this layout, named the station "Dunkton Combe", as a compromise between Dunkerton and Monkton Combe.  It is not an accurate model of either station, though both had a station building similar to the one modelled by Bob 

With so few trains on the line, it is worked as "one engine in steam". There are no signals or signal boxes and all points are worked by hand. There is no loco shed at the terminus, nor any facility for watering locos. Train movements are adapted from the February 1912 timetable.

Ashbrooke


A Midland & South Western Junction Railway (MSWJR) 3mm scale 12mm gague layout  by John Thomas of the North Wilts & Gloucester group.


  
This layout represents a double track through station loosely based on Foss Cross on the Midland & South Western Junction Railway (MSWJR). The concept is that the MSWJR continued as a secondary route through the Cotswolds despite the Great Western Railway's endeavours to rationalise it. You can legitimately run though trains from the LMS in the north and the Southern Railway in the south, as well as a wide variety of Great Western types and (in the later period) Midland and Southern Region as well as the local Western Region and British Railways stock.


John's aim in building the layout was to depict trains passing a wayside station, with all passenger trains calling at the station and the occasional goods or local passenger train stopping to shunt.


This layout is unusual in having a fiddleyard at each end with a model of a through station in the middle. The buildings are based on prototypes from the Cotswolds. John's scratch-built models contribute to the unique and convincing appearance of the layout.



Further layouts to follow in Part 3...
 





No comments:

Post a Comment